六色柔版捲對捲印刷機

分類: PP編織袋印刷線

瑞隆機械工業股份有限公司

國家: 台灣

電話: 886-5-5511888

傳真: 886-5-5571393

聯絡人: 何偉豪先生

馬上詢問

<1.Roll to Roll printing machine is the most efficient way for pp woven bag printing, and capable of two side printing on the bag in one process, based on the current market demand, we are able to Provide 12 colors Roll to Roll printing line>
2，我們的捲筒印刷機提供高質量的印刷和輸出，只需要一個操作人員就可以降低印刷成本，即使油墨成本和電力成本，這是大量印刷袋子的最佳選擇

模型	JLRPM-6800BO / 6C
處理管寬度	800mm（可最大）
打印寬度	800mm（可最大）
打印長度	600-1300mm
打印方法	0 + 6,1 + 5,2 + 4，3 + 3
生產	70M /分鐘
顏色數量	6種顏色
調整打印位置	水平或垂直位置是可調的
＆nbsp;自動邊緣位置控制	1個單位
加熱器	1.8kw x 13烤箱驅動
鼓風機用於加熱器	1 / 2HP×1單位，5HP×1單位
墨輥電機	1HP
風電機	AC 2HP x 1
＆nbsp;供布架	10公斤磁制動器自動張緊繫統
日立自動吊架	1/2 HP x 1，1/4 HP x 1,1ton x 1
＆nbsp;主驅動電機	AC 7.5 HP
電力消耗	35千瓦
尺寸	8200 x 2200 x 3850毫米3
重量	8200公斤

The Ceramic Anilox Roller System

Flexographic printing controls ink volume through a ceramic anilox roller — a steel roller engraved with a microscopic cell pattern and coated with industrial ceramic for wear resistance. Each cell picks up a precise, metered amount of ink from the ink tray and transfers it to the printing plate at a consistent volume, regardless of press speed. The cell count (lines per centimeter) and cell volume determine how much ink is laid down, allowing printers to dial in the correct ink film weight for each color without adjusting press pressure. The JLRPM-6800BO/6C uses one dedicated ceramic anilox roller per color station across all six stations.

Inter-Color Drying and Print Registration

Printing multiple colors in sequence requires each ink layer to dry before the next station applies ink on top of it — otherwise colors bleed and mix at the surface. The JLRPM-6800BO/6C includes an inter-color drying system between each of its six stations, ensuring the previous color is set before the web enters the next print nip. Print registration — the precise alignment of each color relative to the others — is maintained through servo-driven tension control on the web path. The machine supports four configuration modes (0+6, 1+5, 2+4, 3+3) to print on one or both sides of the PP fabric in a single pass at speeds up to 100 meters per minute.