汽車包邊成型機-YT系列

分類: 立關臥射

煜達機械股份有限公司

煜達機械股份有限公司
國家: 台灣
電話: 886-2-26946450
傳真: 886-2-26946454
聯絡人: 蔡小姐

YT Series

  • Fixed mold (V) and the two sliding mold (2S) adopts four-column vertical pressure clamping for horizontal injection. Strong mechanical structure allows greater endurance for clamping force up to 500 ~ 800TON.
  • Standard disc is vertical 3-column vertical pressure clamping. The two station design is for horizontal injection.
  • With special needs, 4-columns vertical pressure clamping is available with the disc mold stations at 3 to 4.
  • The nozzle can be adjusted in height level, easily for center level correction of mold feed into make mold design more convenient.
  • Injection is smooth and powerful, suitable for forming larger fitting pieces. With a special L / D aspect ratio of the injection screw, it is more suitable for engineering plastics.
  • Scalable computer programs, automatically removing, embedded devices, and other connections allow fully automatic operation of the whole machine.
  • ─Two sliding molds (2S) ─ (alternating dual sliding molds): One mold is in injection molding and the other is outside for removing and placing mosaic pieces. Operation safety and production efficiency is high.
  • ─Round disc (R) ─ alternatively rotating back and forth at 180 ° horizontally to allow users to operate in a fixed plane for retrieval and inserting pieces. This makes the work more convenient.
型號 YT-60 YT-90 YT-120 YT-160 YT-200 YT-250 YT-350
V 2S 3R V 2S 3R V 2S 3R V 2S 3R V 2S 3R V 2S 3R V 2S 3R
射出系統
螺桿直徑
(mm)
32 & 40 34 & 42 38 & 50 42 & 55 46 & 60 55 & 65 60 & 70
射出壓力
(kgf / cm2)
1914 & 1225 1931 & 1256 2079 & 1200 2000 & 1161 2034 & 1195 2082 & 1491 1749 & 1285
理論射出容積
(cm3)
124 & 194 149 & 228 204 & 353 276 & 474 365 & 621 593 & 829 706 & 961
最大射出重量
(gr)
112 & 175 134 & 205 183 & 317 249 & 427 328 & 559 534 & 742 630 & 860
最大射出重量
(oz)
3.9 & 6.1 4.7 & 7.2 6.4 & 11.1 8.7 & 15 11.5 & 19.7 18.8 & 26.2 22.1 & 30.2
射出率
(cm3 / sec)
56 & 88 70 & 108 81 & 141 109 & 187 128 & 217 169 & 236 227 & 310
鎖模系統
鎖模力
(tf)
60 90 120 160 200 250 350
鎖模行程
(mm)
250 250 300 300 350 400 450
最大開距
(mm)
450 450 550 550 650 700 850
最小模厚
(mm)
200 200 250 250 300 300 400
柱內空間
(mm)
390 × 390 440 × 440 490 × 490 580 × 580 640 × 640 740 × 740 840 × 840
頂出力
(tf)
1.7 2.7 3.5 4.3 4.3 5.3 7
頂出高度
(mm)
100 100 125 125 125 150 150
射嘴中心高度
(mm)
130 ± 20 130 ± 20 150 ± 25 150 ± 25 175 ± 25 175 ± 25 175 ± 25
模中心至射嘴距
(mm)
min 125 min 125 min 125 min 150 min 200 min 200 min 250
滑模系統 (2S)
滑模行程
(mm)
460 520 580 650 750 870 970
滑模尺寸
(mm)
840 × 380 940 × 420 1060 × 480 1190 × 540 1380 × 630 1600 × 730 1800 × 830
圓盤系統 (VR)
圓盤直徑
(mm)
Φ 856 Φ 980 Φ 1172 Φ 1350 Φ 1550 Φ 1750 Φ 1750
其他
電動機
(kw)
7.5 (10) 7.5+2.2 (10+3) 11.2 (15) 11.2+2.2 (15+3) 14.9 (20) 14.9+2.2 (20+3) 18.7 (25) 18.7+2.2 (25+3) 22.4 (30) 22.4+2.2 (30+3) 29.8 (40) 29.8+2.2 (40+3) 39.3 (50) 39.3+2.2 (50+3)
電熱
(kw)
6 7.5 9 11.5 13.5 16 19
油箱容量
(L)
250 300 350 400 450 500 600
機械尺寸 : L 3.2 3.2 3.5 3.7 3.7 4.1 4.1 4.1 4.5 4.5 4.5 4.9 4.9 4.9 5.3 5.3 5.5 5.8 5.3 5.5 5.8
機械尺寸 : W 1.1 1.6 1.2 1.2 1.9 1.3 1.3 2.1 1.5 1.4 2.3 1.7 1.5 2.6 1.9 1.7 2.8 2.3 1.7 2.8 2.3
機械尺寸 : H 3 3.2 3.3 3.1 3.3 3.4 3.3 3.5 3.6 3.5 3.7 3.8 3.7 3.9 4 4.1 4.2 4.3 4.1 4.2 4.3
機械重量
(T)
4.9 6 7.5 7 8 9.5 8.5 10 12 10 11.5 13 12 14 16 16 17 19 17 19 21
聯絡廠商