English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
雙(腕)錐式螺桿押出(造粒)機
產品分類 : 橡膠押出線
具獨特的「Y型」雙錐螺桿設計，適用於捏合機、萬馬力機的下輔配套設備，混練後所排出的膠料可直接投入，經 過雙螺桿擠出後自動押出、過濾或造粒各種所需的形狀，可配合連續化的生產作業。其料槽及料管可選擇「可移 出」之設計，易於清潔內部的腔體以及方便更換原料或顏色的改變，可有效防止原料交叉汙染的情形發生。
立式塑膠、立式射出成形系列 YHL 系列
產品分類 : 立式射出成型機
- 立式直立鎖模，直立射出的機體方式，結構簡單，寬檯面。 - 採射出中心偏位元的設計方式，使三面空間更加開放，能適用長條狀汽車密封條接角成型或帶有導線產品成型，讓成型作業更加容易。 - 立式塑膠射出機，射出系統採標準、模組化設計，通用各類型的嵌件注塑成型，塑膠成型能力特優。 - 立式橡膠射出機，射出系統採螺杆進料，柱塞射出二階段的設計，能適應不同硬度的橡膠材料，橡膠注射穩定精確。 - 最優化的設計方案，如鎖模/注射/塑化等單元最可靠的射出成型設備之一。
非加壓型捏合押出機 (DAKE-系列)
產品分類 : 捏合機
此機器有「多種不同形狀的攪拌軸葉片設計」以及「排料方式」，廣泛應用於各種產業上的中、高黏度之原物料混練攪拌，如黏著劑、熱熔膠、矽膠、BMC、陶瓷、玻璃纖維、磁性複合物、印刷油墨、膠帶、熱固性樹脂、食品、化妝品、製藥工業等等。
特殊客製化磨粉機系列
產品分類 : 破碎、粉碎與減積設備
Suitble materials: HDPE, LDPE, flexible/rigid PVC, polypropylene, polystyrene, polyamide, polyester, copolymers, fluoropolymers and synthetic rubber etc. Pulverized Range: 0.1mm to 2mm quality powder for best flow with a specially designed disc mill.
乳膠避孕套浸漬機-JB-CD
產品分類 : 橡膠浸漬機
Condom manufacturing machine process Collecting the raw materials Rubber latex is obtained from the milky fluid produced by various tropical plants. Latex is actually an emulsion or dispersion of tiny rubber particles in water, and ingredients added to the latex must be able to attach to the rubber particles during compounding. Compounding Next, chemical additives are mixed to form a paste. This paste is then blended with the liquid latex in a process called compounding. Storage The latex and chemical compound is then unloaded into drums for storage, where it remains for approximately seven days. During this period, vulcanization chemically strengthens the bonds of the rubber. The storage time also allows any air, which might have been trapped in the mixture during compounding, to escape. Dipping The compound is then added to the dipping or condom-forming machine. The dipping machine is a long, hooded machine approximately 100 feet (30.5 m) in length. Thick tempered glass rods move along a closed belt between two circular gears. The belt drags the rods, which are called mandrels, through a series of dips into the latex compound. The mandrels rotate to spread the latex evenly. Several coats are required to build the condom to its required thickness. Between each dip, the latex is hot air dried. After the final dipping and drying, the condoms automatically roll off the mandrels. A machine shapes and trims the ring of latex at the base of each condom. Tumbling Next, the condoms are put in a tumbling machine, where they are coated with talc or another similar powder to prevent the rubber from sticking to itself. Testing After a curing period of several days, the condoms are sampled by batch and tested for leaks and strength. The first such test is the inflation test, in which the condom is filled with air until it bursts. Condoms are required to stretch beyond 1.5 cubic feet, about the size of a watermelon, before bursting. This test is considered most important because the elasticity of the condom keeps it from tearing during inter-course. In the water-leakage test, the condom is filled with 10 ounces (300 ml) of water and inspected for pin-sized holes by rolling it along blotter paper. Condoms are also tested electronically. This involves mounting each condom on a charged stainless steel mandrel. The mandrel is passed over by a soft, conductive brush. If pin holes are present, a circuit will be established with the mandrel, and the machine will automatically reject the condom. Packaging Condoms that have successfully passed these tests are rolled by a machine. Rolling the condom makes it easier to package and use. Lubricant and spermicide may be applied by a metering pump just before the top wrap is added in the foiling process.
