English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
淋膜機HC150-LM4.2 / HC100-LMS2.6/ HC80-2LMS0.7
產品分類 : 淋膜機
●淋膜型式：單面 / 雙面 / 三合一 ●壓出原料：PP, PE ●淋膜寬度：600~ 4000MM ●淋膜材料：PP/PE 編織布，牛皮紙
鋼片聯軸器
產品分類 : 傳動、電機與驅動系統及齒輪
(1) NO-LUBRICATION REQUIRED： No lubricants are needed and no noises or wear and tear produced because there is no sliding or friction. (2) MAINTENANCE-FREE： ”LEAVE IT FOR GOOD AFTER INSTALLATION” It lasts forever as long as is used correctly. (3) LIGHT WEIGHT W/HIGH TORQUE： By operations, it is available in a wide range; it can be made of aluminum alloy to reduce the weight. (4) LARGE OFF-CENTER ALLOWED： With large range of off-centering, it can be used flexibly in all kinds of transmission systems. (5) SUITS HIGH-TEMPERATURE APPLICATIONS： All-metal-pars construct makes it suitable for high temperatures. (6) BACKLASH-FREE: WITH GOOD TORSIONAL RIGIDITY Perfect for axial rotation that requires accuracy and machines with phase-control. (7) CAN BE USED IN EVEN HIGHER SPEEDS： It is highly balanced due to being backlash-free and light weight. (8) EASY TO INSTALL： Comprising small number of pasts and being compact, it can be installed/uninstalled quickly. (9) ROBUST STRUCTURE AND HIGH SAFETY COEFFICIENT： With load stress kept at low standard, it works with very high safety coefficient. (10) AUTOMATIC PROTECTIVE DEVICE： In case of damage, an automatic protective device rotates via pads.
CM-MTE 系列 積木式雙螺桿押出機
產品分類 : 雙螺桿押出機
1.螺桿採用積木方式，元件可被快速組合，以符合客戶生產各種不同原料之需求。 2.螺桿以同向旋轉，塑膠原料於料管內經由高速高剪切而獲得更佳之分散性及混練效果。 3.應用：高濃度色母、黑色及白色色母、填充、改質、改性，強化、聚合、反應、分散、合金等。
後段外包裝設備 - 裝盒機 - CJ-120
產品分類 : 裝盒機
此折盒設備採用水平式自動生產方式.適用於少樣多量的產品.可根據所需要置入之內容物增加選擇配備以達到設備最佳化.於限定紙盒範圍內,只需更換少許零件與調整即可應用於不同產品。
METAL INJECTION
產品分類 : OEM/ODM代工服務
Metal injection molding (MIM) is a metalworking process by which finely-powdered metal is mixed with a measured amount of binder material to comprise a ‘feedstock’ capable of being handled by plastic processing equipment. This is cost-effective for small, intricate, high-volume products which would otherwise be quite expensive to produce by alternate or classic methods. Mold Interconnect Device (MID) integrates a circuit into a plastic part reducing weight and dimensions. We use an innovative assembly process: from injected mold to laser etching then plating with copper or gold. APPLICATIONS Mobile phone’s aerial circuit Medical audiophones Automotive steering wheel Position sensor
一步法射出吹氣成型機 FS-BT
產品分類 : 射出中空成型機
FS-BT-S採用2站式伺服旋轉台及側吹系統之設計:在射出瓶胚后,伺服旋轉台轉向180度,由伺服螺桿將瓶胚口模移至惻吹區吹塑成型。使用側吹系統之設計,節省並增加生產空間,讓瓶胚剪尾装置及成品輸送可以架在機台內部,達到完全自動生產。此機種適用於短時間內生產小瓶子。 FS-BT-J也適用於生產寬口瓶此機種和FS-BT-S有等同的生產優點,但是適用於生產寬口瓶此機種之結構較大、較高之射出量及較強之鎖模力。 採用2站式之機台設計是鍍塞之創新設計,FS-BT-S/FS-BT-J僅需較少的瓶口模穴、較低模具成本和更有彈性之模板空間,節省成本。當生產多樣的產品時,模具成本是重要的投資成本。銀塞射吹設計是簡化和創新之生產設計,相對降低成本。
