搜尋

單層PP抽紗機-TY-TLM系列

產品分類 : 纖維、長絲與扁帶押出線

TLM series is an economical design of extrusion tape line, and low power consumption produces high performance as the main feature.

雙面雙層共擠壓複合淋膜機

產品分類 : 工業覆膜/塗佈機

主機壓出量：350 Kgs x 2 Sets = 700 Kgs/Hour  副機壓出量：150 Kgs x 2 Sets = 300 Kgs/Hour  線速：40-220 Meters/Minute  淋膜寬度：600MM~1600MM

HR系列吹袋機

產品分類 : 吹膜押出線

Film width available from 2000 ~ 4000mm, excellent for heavy-duty bags. Unique die head and air ring design to achieve stable bubble and better even thickness film and bag. Gear box uses high torque and enforced lubrication system. Automatic surface winder with uploading device. Oscillating haul-off. Blown film machine with oscillating haul-off system, built under the supervision of professional European engineers. AC inverter motor is designed for high production, quality and reliability to produce tubular film. High torque gear box with enforced lubrication system to minimize machine shutdown time. Good mixing performance of screw and barrel results in homogeneity and high output. Oscillating haul-off unit allows minimum web tension that eliminates wrinkle or bulge problem. High volume air ring is designed for ideal cooling efficiency.

GF/ISB射拉吹系列模具

產品分類 : 中空成型模具

兩位置式轉盤模具室特殊機構設計(專利核准)。 模具設計採用底座共用方式,可任意變化產品之款式、重量、甚或瓶身長短,只需換下配件即可,故可降低開模成本。

cheng-mei

產品分類 :

cheng-mei

P-18

產品分類 : 射出成型模具

針閥式熱嘴-AVMT

產品分類 : 澆道系統

本熱嘴適合用於大型或是形狀複雜之塑件。 本熱嘴於流道之中有一閥針以氣壓或油壓驅動進行澆口之開關動作，當閥針有打開時，可以行塑料充填，於塑料充填完成，保壓之後，再以閥針封住澆口，如此則可使用於大澆口的情況，並可免除澆口處牽絲的問題，使保壓的過程趨於完美，同時可獲得美觀的澆口。 對於一模多進澆之模具，可採用序列控制方式來解決結合線等問題。

HDPE/PP單絲擠出生產線（JC-MNP系列）

產品分類 : 纖維、長絲與扁帶押出線

JC-MNP系列單絲擠出生產線設計為單級拉伸和熱定型。該生產線專門用於加工聚丙烯（PP）和高密度聚乙烯（HDPE）。

高純熱交換專用管

產品分類 : 管、板、異型材

自動廢料聚合機

產品分類 : 依應用分類回收產線

專門設計用於將顆粒狀泡沫碎片粘合成矩形塊，以將墊子，床墊，墊子或剝離的圓柱塊製成無休止的床單或地毯墊層。

同向雙螺桿押出機專用齒輪箱

產品分類 : 傳動、電機與驅動系統及齒輪

(1) Both Co Rotating & Counter Rotating types of TB series Twin Screw Gear Reducer are composed by Input & Output elements. Especially for output side which installed by Thrust Bearing plus with flange which could suffer high pressure to absorb the axial pressure caused by the extruders. (2) Following AGMA criterion to design gear elements which adopts low-carbon alloy steel bar materials(Normally, it is SCM420 or same level). The precision reaches AGMA 10 level after carburization heat treatment then treating gear surface grinding to make sure low noise, low abrasion and high efficiency during operation. (3) #294 Series Thrust bearing with axial self-aligning roller type & muti-row stacked tandem bearing package to have advantage of low friction heavy axial load capacity.

後段外包裝設備 - 貼標機 - ABL-M

產品分類 : 標籤機

此貼標設備採用上糊式貼標方式, 設備動作採用全機械式,確保設備動作穩定性, 當產品尺寸變更時,只需更換部分零件與簡易調整即可完成不同產品應用。