English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
PVC自動計量秤重輸送製粒生產線 | CK-DT
產品分類 : 雙螺桿押出機
CYKF的PVC押出製粒經驗在業界富有盛名，專業製造PVC專用的異向雙螺桿，其直徑在Ø 55 to 130 mm 之間。得益於我們長期對PVC押出技術的研究，及與客戶溝通之間的刺激與切磋，致使我們不斷地提升機台的性能、強化製造品質、穩固機台的剛性與使用壽命；對PVC材料的精闢解析，也促使CYKF在PVC押出製粒產線的開發能力，凌駕於產業之上。舉凡硬質PVC、軟質PVC、醫療級複合材料、UPVC、CPVC，發泡及木粉添加等，依照客戶原料配方不同，皆有優異的性能表現。
獨立式 4 色凸版/膠版印刷機 LL-5000
產品分類 : 膠板印刷機
Reel to reel type off-line flexographic printing machine, very good quality for printing the color flexible of 4+0, 3+1, 2+2, machine standard with the manual tension control, machine frame is iron casted and varnish coated, very strong and long duration. Upper side with 2 sets drying box, the films after printing will guide to the drying boxes for drying, ensure that the films can be dried accordance with the speed.
回收機 - Piranha 系列
產品分類 : 製粒機
Auto pellet length control via motor load to keep pellet length constant Low temperature heat soak feature - 20 minutes to soak prior to starting To build perfect granules in real-time Full access to dicer and safe access to blade changing Air cooled pelletizer Dual geometry low L/D ratio screws, manufactured from SACM-645, nitride hardened, ground and polished Barrels are manufactured from SACM-645, honed finish and nitride hardened Cold start protection No material shutdown
大攪拌軸強力加壓利拿式密練機
產品分類 : 捏合機
此機械除同標準型適用於各種橡膠、塑膠及化學工業之摻配料之混合及捏練.大攪拌軸更適合於低溫混練的原料. 此機械由於特殊設計及製造之結構以達到下列之特性: 良好之分散性及均勻性.操作簡單方便.換色容易.更能縮短混練時間,超強熱交換能力,可達成A/B練及一次性混練.
熱板式塑膠熔接機(上氣缸型) KH-31
利用熱板使熔接物表面熔解再行加壓結合。 可達到緊密接合之條件要求，不傷工件之表面，並可做到水氣密等需求。 適用於大型或不規則加工物。 適用於超音波無法熔接或加工困難時。
Vibration Welding Machine HWV-30LS
Vibration welding uses frictional heat to join the interface of two thermoplastic parts under mechanical pressure, the upper clipper clips the thermoplastic to do a high frequency reciprocating according the setting amplitude, it will have frictional heat generated to fully melt the interface, then stop moving and continued to put pressure and cooled to weld two thermoplastic parts
隨機粉碎機 (YBCS)
產品分類 : 塑膠粉碎機
隨機粉碎，減少浪費。可立即回收粉碎少量廢料，除一般水口料大小適合外，也適用於粉碎長條型的材料。 配置多重安全保護裝置，專利設計的安全專案，智慧精算控制下，一旦出現需檢修的狀況，在啟用安全裝置時間內，粉碎機的運轉可剛好停止，此時打開料斗，進行清理、檢查或維修，施工人員無安全之虞。
Ultrasonic Metal Welding Machine KWG2620-EW
產品分類 : 自動焊接機
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
PVC異向雙螺桿押出機
產品分類 : 雙螺桿押出機
高效節能料斗乾燥機SEHD
產品分類 : 乾燥機除濕機
SEHD高效節能乾燥機可用於對大多數不易吸濕的塑料原料進行乾燥，如PS、PP、ABS等，最高乾燥溫度可達160℃。另有諸多配件供選用，可實現熱風回收、過濾原料中鐵屑雜質等功能，亦可搭配腳架實現落地式安裝。
雙錐入料高速造粒整廠設備-水環切
產品分類 : 混合物
橡塑膠混合原料,適用於PVC, EVA, TPR, 碳酸鈣造粒、各種色母造粒、橡膠加硫、硫磺粒、分散劑……等 小馬力，大產能 耗電量小 容易清洗及換料 混合良好 水環切系統
全自動高速雙軸有芯捲取製袋機 / SCR-40/ SCR-50
產品分類 : 塑膠袋製袋機
COSMO Computer control over the entire process From film roll to final bag, one process flow Servo motor, as standard attachment, makes it easy to adjust the bag length and the production speed Automatic film feeding, coordination free from tension adjustment Automatically stop when running out of film Automatically stop when film feeding blocks or bags jam Automatically stop when color scanning misses High production efficiency to save manpower and timeAntomcatically core changing
蜂巢輪型除濕乾燥機 (DHC)
產品分類 : 乾燥機除濕機
1. 採用歐美進口蜂巢輪陶瓷纖維，可提供乾燥空氣露點-40℃以下。 2. 輕巧簡易安裝、拆卸容易。 3. 智慧型液晶微電腦控制及防超溫保護器。 4. 精確智慧型PID 溫度控制器。 5. SSR 系統與多重安全保護裝置。
M3 系列熔體壓力傳感器-MV / V 型
產品分類 : 指示器
Gefran M3系列壓力傳感器，可用於高溫環境。 本系列傳感器的主要特點是能夠讀出介質溫度，範圍高達400°C。 其結構原理是利用液體傳送壓力。 系統充填液體確保溫度穩定。 利用應變計技術將物理測量值轉換成電氣測量值。
Reel to Reel Flexographic Printing Line FSRP-6C (No Cylinder Changing)
Equipped Servo Motors for Precise Printing Graphic and Printing Length Control On-line Servo Control Printing Position Registration System (with Touch Screen Operation) (Each printing station equipped with servo motor to adjust printing position during machine running) Equipped with On-line Camera Inspection (Italy made) Two Units, Monitoring Printing Quality during Machine Running. Equipped with Doctor Blade System and Ceramic Anilox Roller as Standard Equipment
背心式與平口式垃圾袋 三折製袋機
產品分類 : 塑膠袋製袋機
1. 伺服馬達驅動，進料流暢，尺寸精準。 2. 配合封切機，每張自動折疊，省時省力。 3. 可依計數器之設定，一定成所需張數。 4. 可依袋寬需要摺成三摺或四摺包裝方便快速。 5. 利用電磁配合氣壓控制，調整快速容易。 6. 移動式背心袋沖模及電動滾輪。 7. 廢料收集輸送帶。
垃圾袋與平口袋兩用自動封切機
產品分類 : 塑膠袋製袋機
1. 伺服馬達驅動，進料流暢，尺寸精準。 2. 配合封切機，每張自動折疊，省時省力。 3. 可依計數器之設定，一定成所需張數。 4. 可依袋寬需要摺成三摺或四摺包裝方便快速。 5. 利用電磁配合氣壓控制，調整快速容易。
Extrusion Sheet Extrusion Machine For Food Packaging, Disposable Tableware
產品分類 : 薄膜和片材生產線
Extrusion Sheet Extrusion Machine For Food Packaging, Test
