English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
塑膠片材押出生產設備
產品分類 : 薄膜和片材生產線
1. 使用交流變頻馬達，以最低的電力消耗達到優良效能。 2. 料斗備有低料位感應器，並有自動送料器，可保材料穩定注入。 3. 油壓換網機能避免任何雜質進入熔融泵(melting pump)及平模頭內。 4. 精確控制熔融泵運轉，保持熔融塑膠流動穩定順暢。 5. 押出機及液泵之運轉速度經壓力同步系統控制。
射出機、壓鑄機快速換模系統
產品分類 : 換模系統
產品簡介 迎接少量多樣高頻率換模生產型態的時代，爭取換模時效、確保操作安全—正是導入快速換模系統的最佳時機。 系統安全功能 各油壓迴路具有逆止防漏功能 此系統具壓降時自動補壓功能 各油壓迴路具低於安全壓力檢知功能，並與機台連線 夾模採對角交叉方向鎖模控制 操控具多項防呆功能
高速單層膜雙膜頭吹袋機
產品分類 : 吹膜押出機
This two-head blown film machine line can produce 2 film rolls of the same width at the same time, and the production capacity is thus comparatively higher than models with only one die head. Thanks to the twin-head design, it not only occupies less space but also consumes less energy, which offers an economical solution for producing plastic bags of smaller width.
熔噴模具
產品分類 : 押出模頭
SUITABLE AVAILABLE FOR POLYMERS INCLUDING PET And PP High processing precision. Internal heating with heating rod, external heating with heating board, temperature control by heating oil cycle to ensure products of good uniformity. Meltblown filter in continuous and automated production to cut production losses more than 35%, cu costs, reliable product quality. Cut production materials consumption sharply. Featuring high yield, low power consumption, low loss, easy operation. Integrated meltblown Extrusion Die. Integrated meltblown Extrusion Die featuring precision aperture, good consistency and without maintenance wear out. Improved meltblown fiber quality and uniformity, improved product quality. Improved Extrusion Die life cycle and life span. Reduced Extrusion Die change operating time, cut maintenance cost and power consumption. Installation capacity down 30 ~ 40 KW. Cut production costs sharply.
全電中空成型機 PK-e 系列
產品分類 : 押出中空成型機
單站/雙站 單頭/雙頭/三頭/四頭…8頭 生產範圍：2ml~35L 多層：1-6 層 多穴：1~8穴 專門用於PE/PP/PETG/PVC/尼龍/多層 材質 選購設備：刻度線 Clamping system:Ultra Locking System/Toggle/Tie Bar 驅動型式: 高效能全電伺服系統/油電伺服驅動系統/高效能循環系統/必迴路比例閥系統 支援: 全電/全油厚薄控制器/自動除溢料/自動回收/自動供料系統/遠端監控故障排除/模內貼
齒輪聯軸器
產品分類 : 傳動、電機與驅動系統及齒輪
(1) Crowned tooth allowed larger tolerance in shafts and higher loads. (2) Special hardening treatment W/high strength and anti-abrasiveness. (3) Closed type coupling--easy lubricate & anti dust as well as no leakage. (4) The type of TIEN YI GEAR SHAFTS COUPLINGS had been successful the first processing, it must be done the second procedure heat treating again according to material. And it were given them more rigidly precise, increasing stronger tenacity. At last removing gravitation by striking-ball bearing when those steps all finished.
Hopper-Dryer
產品分類 : 乾燥機除濕機
WSB秤重式計量混料機
產品分類 : 配料設備
WSB 重力計量混料機 Maguire混料機是全球最受歡迎，最可靠的重力計量混料機。 10個系列超過120種型號的混料機 全球運行著近60,000台Maguire重力計量混料機 比其他任何生產商都提供更多的標準型號
HDPE單層超高速吹膜機
產品分類 : 吹膜押出機
橫走型機械臂TES系列
產品分類 : 工業機器人
INSERT INJECTION MOLD
產品分類 : 射出模具
INSERT MOLDING TECHNOLOGY: When a metal, plastic or ceramic part needs to be embedded in plastic to improve product structure it is called Insert Molding. It is a widely used process and one that YOMURA TECHNOLOGIES specializes in. With Insert Molding, a part is placed in a mold cavity then a selected plastic material is injected directly over it resulting is a single part with the insert(s) encapsulated by the material. This process normally uses engineering plastics for improved wear resistance, tensile strength and weight reduction. Insert Molding can be a highly efficient alternative to the assembly of discrete parts using soldering, connectors, fasteners, or adhesives. It also expands plastic capabilities and can reduce final product cost by limiting the amount of costly metal needed to create a part. And importantly, because we can use conventional single shot injection machines for Insert Molding, tooling costs are lower than with a multi-shot processing. Benefits: Reduced assembly and labor costs Because insert molding joins numerous components with thermoplastic, assembly and labor costs are greatly minimized. For example, a single stamping can be overmolded, then perforated to create multiple circuit paths. Reduced size and weight By eliminating fasteners and connectors, and by combining the physical strength of resin and metal inserts, insert molding yields smaller and lighter components. Increased reliability With every part tightly secured in thermoplastic, an insert molded component prevents part loosening, misalignment, improper terminations, and other problems. The thermoplastic resin also provides improved resistance to shock and vibration. Increased design flexibility Designers appreciate the virtually unlimited configurations that insert molding allows. For example, in creating a 3D circuit board, overmolding permits circuitry to move freely through the part, from inside to outside, up walls, down in holes-and the plastic ties it all together. Materials: Engineering plastic or Thermo Plastic Rubber (TPR) inserted with metal frame die casting, plated copper pin, sockets, wire frames, etc. Applications: TPR + Metal Frame(3C Mechanical Parts) ABS + Al. Die Cast (Sports/ Medical) Eng. Plastic + Patting Pin/Eng. Plastic + Wireframe (Connector) Eng. Plastic + Copper Pin/Contact (Precision Electronic Component)
後段外包裝設備 - 貼標機 - ABL-M
產品分類 : 標籤機
此貼標設備採用上糊式貼標方式, 設備動作採用全機械式,確保設備動作穩定性, 當產品尺寸變更時,只需更換部分零件與簡易調整即可完成不同產品應用。
THS系列-850/950/1100w 雙截
產品分類 : 工業機器人
• 全伺服馬達驅動 • 高速取出時間0.5秒，週期時間2.9秒 • 雙軌、隔離式鏈條 • 馬達散熱設計耐久壽命長 • 8.4吋全采觸控式螢幕
SIX-SHAFT AUTOMATIC ALUMINUM FOIL / CLING FILM REWINDER AUTOMATIC REWINDING & SHRINK FILM PACKAGING MACHINE (AH-6S + TPG50)
產品分類 : 分切機和複捲機
AH-6S connected to TPG 50, the fully automatic production line, fully automatic operation system. Use a conveyor to combine two models for manufacture. Machine will automatically rewind material after input paper core. When the roll is finished and unloaded, it is carried to the packing area for automatic packing process. If the packing function is not used temporarily, TPG50 can be switched to delivery mode. Or use the conveyor which connects 2 machines to unload products from the side. This production line achieves automated manufacture. It saves time and manpower of moving materials and rolls from machine to machine. TRU-BRUTE Machinery always provides the beneficial collocation of machine for you. Welcome to consult machine with us. We will at your service.
FCD-HL 三機一體無熱轉輪除濕機
產品分類 : 乾燥機除濕機
採用先進變壓吸附技術，透過壓縮空氣實現高效除濕。整合除濕、乾燥與送料三大功能，配備斷料式吸料箱確保原料純淨無污染。提供30-1000kg多種容量選擇，節能高效，是精密注塑乾燥的理想解決方案。
電動射出機專用齒輪減速機
產品分類 : 傳動、電機與驅動系統及齒輪
(1) 採用特殊之設計與製造方式，適合用於高扭矩、高轉速之運轉環境中。且運轉時損耗少低噪音，能提供齒輪減速機較高之傳動效率。 (2) 於輸入軸(電動馬達)與輸出軸(連接驅動螺桿和料管)之間，採用三段減速設計。其輸入軸與輸出軸兩者之間的距離空間，恰好正足以涵括馬達、減速機箱體及連接螺桿和料管之完整系統配置嵌入其中。形成一U型外觀設計，占用最小的空間，達到最大的空間使用效益。 (3) 齒輪元件之設計製作，採用AGMA標準(亦接受客戶指定之DIN、JIS標準設計製作)，齒輪元件材料採用高品質之低碳合金鋼(一般為SCM420等級之材質)製作。齒輪元件經滲碳熱處理之後，再經由齒面研磨製程加工後，其精度等級可達AGMA10級以上，確保齒輪減速機運轉時之低噪音、低損耗和高效率之特性。 (4) 馬達法蘭和驅動軸之設計製作，除本型錄上之標準形式可供選擇之外。亦可依據客戶的需求，客製化設計製作，以達到TGSM齒輪減速機最廣泛的適用性。
核心保存器/核心恢復器
The Core Saver is also known as Recor and Core Restorer. Our range has been utilized on large scale in different industries, including Packaging and Plywood. The innovation and research-driven product are custom-made to address the mishandled cores. Help make a damaged/ collapsed/ distorted/ elliptical core into a 360 degree in a few minutes. Being an innovation and research-driven company, we wholly understand the requirements of our clients and continuously streamline our product range, including Core Saver.
CM-MTE 系列 積木式雙螺桿押出機
產品分類 : 雙螺桿押出機
1.螺桿採用積木方式，元件可被快速組合，以符合客戶生產各種不同原料之需求。 2.螺桿以同向旋轉，塑膠原料於料管內經由高速高剪切而獲得更佳之分散性及混練效果。 3.應用：高濃度色母、黑色及白色色母、填充、改質、改性，強化、聚合、反應、分散、合金等。
連續式中空成型機 PK-TL 系列
產品分類 : 押出中空成型機
BMC專用射出成型機-300BMC – 850BMC
產品分類 : 臥式射出成型機
Common commissioning for molding products such as electric parts and auto headlamps with insulated characteristics. Steel and FRP plates are installed on the fixed and movable platens to insulate the heat generation from the thermoset mold.
塑膠管材押出設備
產品分類 : 管材及異型材押出生產線
RAPID PROTOTYPING
產品分類 : 熱澆道系統
With the advent of 3D printing, rapid prototyping can now be done quickly and affordably. YOMURA TECHNOLOGIES is equipped with a high end, Digital Light Processor 3D printer built by Carima, a South Korean company with over 30 years of optical manufacturing experience. Unlike Fused Deposition Modeling (FDM) 3D printing which heats a plastic filament then squeezes it through a nozzle to print one layer at a time, DLP uses a special light wave to activate a chemical reaction in a photopolymer resin which then cures into solid 3D object. DLP objects are smoother, more detailed and almost seamless, ideal for professional quality prototypes. 3D PRINTER SPECS Max Build speed: 30mm/hr Resolution: 1920 x 1080 Size: 200 x 112 x 200mm 245 DPI High-end DLP (Digital Light Processing) 12 micron engine enables a very fine prototype Very minimal material waste MATERIALS Acryl: Easy post processing and coloring ABS-like: Semi ABS durability Epoxy: Great durability Rubber-like: Elastic material Lost-Wax: Metal Casting
後段外包裝設備 - 裝盒機 - CJ-120
產品分類 : 裝盒機
此折盒設備採用水平式自動生產方式.適用於少樣多量的產品.可根據所需要置入之內容物增加選擇配備以達到設備最佳化.於限定紙盒範圍內,只需更換少許零件與調整即可應用於不同產品。
THS 850/950單截
產品分類 : 工業機器人
•真空夾具電路。 •自動模式微修改。 •自動堆垛/碼垛。 •從模具的型芯/型腔側取出零件。 •拒絕零件/報警/操作歷史。 •站在模具上，等待外面的模具。 •錯誤的計數/分解歷史/操作記錄。