How to Configure the Recycling Line? Industrial Shredders Selection Based on Material Characteristics
An industrial shredder is a powerful piece of mechanical equipment used to tear large materials into smaller sizes, with the core purpose of reducing volume, facilitating recycling, or preparing for subsequent processing. The selection of industrial shredders depends on the characteristics of your materials: hard plastics need to be sheared and crushed before washing, tires need to be graded and crushed, and steel wire needs to be separated. The following describes typical equipment combinations and complete recycling lines based on the main materials.
Plastic
First, the plastic shredder performs primary size reduction to 20-80 mm, and then the plastic granulator refines the fragments to 8–12 mm flakes. Equipped with a friction washer, a sink-float washing tank, a vertical dryer, a zig-zag classifier and other machines, the line achieves efficient plastics recycling and treatment.
Tire
The entire tire is pre-shredded. Then a two-stage rasper system effectively liberates the steel from the rubber, enabling effective separation and the production of clean wire. The fine granulation system is equipped with a special rotor designed specifically for tire rubber size reduction. Textiles and dust are aspirated at several points in the recycling system. Water spray and misting systems are installed on key components to maintain processing temperatures at safe levels and to protect against fire.
E-waste
For different types of WEEE, shredders are combined with a magnetic separator, a wind separator and a gravity separator, using a production process that combines shredding, pounding, and grinding to achieve effective separation of different materials and ensure efficient recycling.
Battery
The LiB recycling line mainly deals with lithium-ion batteries from different sources, including end-of-life vehicle cells and small modules, cell-phone lithium batteries and notebook lithium batteries. The plant design includes shredding, solvent drying, air separation and density separation for the purpose of retrieving valuable materials such as black mass, copper and aluminum.
RDF/SRF
The line adopts a process scheme of pre-shredding followed by crushing, ensuring sufficient material processing and uniform material volume. It is suitable for the recycling and treatment of various types of waste textiles and high-calorific-value industrial solid waste, capable of crushing materials with high mud and sand content and small metal impurities, with stable system performance and high production capacity.
In short, industrial shredders are a common front-end of various recycling lines, but there are significant differences in torque, blade shape, safety protection, and downstream sorting configuration among the shredding and crushing equipment for different materials. Matching equipment combinations with material characteristics is necessary to find the best solution for a recycling business among processing capacity, operating costs, and safety and reliability.
Exhibitions Related Articles
- 孟加拉展覽
- 中國塑橡膠展
- 杜拜塑橡膠展
- 德國塑橡膠展
- 印度塑橡膠展
- 印尼塑橡膠展
- 伊朗塑橡膠展
- 日本塑橡膠展
- 墨西哥塑橡膠展
- 波蘭塑橡膠展
- 俄羅斯國際塑橡膠展
- 台北塑橡膠展
- 泰國塑橡膠展
- 土耳其塑橡膠展
- 阿拉伯塑橡膠展
- 美國塑橡膠展
- 越南塑橡膠展
- 台北國際包裝工業展
- 沙烏地阿拉伯展覽
- interpack 德國包裝展
- PRS 荷蘭回收環保展
- 越南河內塑橡膠展
- 法國里昂塑橡膠展
- 義大利米蘭塑膠展
- AMI德國回收展
- 秘魯國際塑橡膠工業展
- SWOP
- 印尼回收展
- 柬埔寨國際塑橡膠印刷包裝工業展
- 中國包裝Propak展
- 哥倫比亞展
- 台灣國際智慧能源週與台灣國際淨零永續展
- 中國國際包裝工業展
- 日本國際塗佈加工暨製造技術展
- NPE